Environmental Responsibility

Environmental pollution and climate change has always been a worldwide issue and requires sustained effort of every nation, every organization and every individual. As a producer, KIMSEN always aware that any production activities, can have an impact on the surrounding environment. As we continue developing our business operations in various fields, it is our mission to proactively develop initiatives to respond to environmental issues.


1. Environmental Management ISO 14001: 2015


ISO 14001 is the first common standards on environmental management is recognized worldwide. We have been implementing, building Environmental management systems according to ISO 14001: 2015 Standards. The introduction of environmental management system in accordance with international standards is our commitment - KIMSEN INDUSTRIAL CORP. - as a positive contribution to environmental protection.

2. Waste Water Treatment System
Anode and painting processes need to use many chemicals, acids, bases, heavy metals are substances potential to cause pollution of the environment. With the goal of sustainable development and are aware of corporate responsibility in protecting the environment; The company has invested Kim Sen lines modern wastewater treatment, sorting and ensuring wastewater treatment to ensure safety before being discharged into the waste water system shared IPs.

3. The exhaust treatment system
Emissions from medical waste incinerators are very toxic. It should reach over 1,000 degrees C to completely eliminate dioxin new.
Recently, in our country, handling industrial waste, medical waste incineration method is applied fairly common, however, problems arise that must be handled like emissions, especially incinerators of hazardous waste. Master Pham Van Hai et al (Institute for Labour Protection) has the solution to this problem.
Incineration is the process uses high temperatures to decompose the organic compounds in the waste and minimizes the volume. Currently, municipal waste due to high humidity, organic trash originating high, high solids ratio hardly burned up mainly handle the burial. But hazardous waste as medical waste or industrial waste, it is necessary to apply the method to burn because if landfill will cause environmental pollution and ground water sources.
Proposed emission abatement technology incinerators, the team was classified by small capacity, medium and large.

Small capacity incinerator
With size oven handles about 300 kg / day, may be technology applications processor include low pressure venturi device, buffer tower, smoke fans, pumps, tanks and recirculation damper system.

The working principle is: Flue Gas after the last out of the secondary chamber damper, enters venturi device to filter dust and lowering the temperature. From venturi, water and gas scrubbing switch. Anatomy of the scrubbing include padding by stitching porcelain, water spraying and water separator. At the tower, part of the water will flow down along with the dust still settling basin gas will go back up through the pad, where it was lower the temperature, the remaining dust filter portion and gases such as SO2, HCl. Pollutants are adsorbed water flowing down the clarifier, and clean air will be pushed into the chimney through the fan and released into the atmosphere.

Equipment for waste gas treatment incinerator can insert additional incinerator system without significantly altering the structure of the boiler equipment. When necessary, additional chemicals into the pool to handle toxic gases.

Large-capacity incinerators
With scale incinerators handling more than 1,000 kg / day, often complete design and synchronized from the garbage area, incinerator, equipment handling, ash removal area, central control chamber .. . Much of the stages of mechanized or automated. The average temperature incineration of this type of oven larger than 1,000 degrees Celsius, 1-2 second gas retention time.

Exhaust treatment system including: equipment precipitators (dry filter or electrostatic cloth bag formats) and leaching of toxic gases such as SO2, HCl (lime and activated carbon). These substances are injected into the mixing chamber and then collected by filtration equipment for recirculating dust. Lime adsorption effect of acid fumes, activated carbon adsorption dioxins and furans. Treatment system is also fitted with the device temperature, concentration of some gases such as carbon to monitor gas quality and efficiency of the furnace decomposition.

The average capacity incinerators
With size oven handles about 300 to 1,000 kg / day can use the static bottom type, have composed many combustor, combustion gas temperatures of over 1,000 degrees C. The retention time of the gas in the combustion chamber 1 -2 sec. Exhaust gas treatment system in principle the same principle with large capacity oven was introduced above.

Handling of hazardous waste by incineration method is still no alternative measures because it has many advantages. Thus improving management efficiency and study applicable technologies to handle extra emissions from incinerators will make the process more complete, better environmental protection air.

4. Raise awareness of staff
Not only solution selected machines, parallel to combine with human factors. Specifically, by continually building and improving staff to enhance professional qualifications; regular open training courses for each person of KIMSEN instill mutual commitments. Especially commitment to the environment and strive to build a production environment and working green - clean to minimize the waste into the environment around them.